Galvanized steel products are made by cleansing and heat-treating rolled coils before dipping them into a bath of molten zinc. Through this process, the coils are plated with zinc only (GI), zinc and iron (GA) or zinc, aluminum and magnesium (PosMAC).
The tables below represent the thickness and width of products available. These dimensions are subject to change.
Please contact our sales representative before placing an order.
| Product | Available Dimensions (mm) | Available Dimensions for Each Thickness (mm) | |
|---|---|---|---|
| Thickness | Width | ||
| Commercial (SJ) | Thickness: 0.3-2.3 Width: 700-1860 |
0.3~0.6 | 700~1550 |
| 0.6~0.8 | 700~1750 | ||
| 0.9~1.6 | 700~1860 | ||
| 1.6~2.3 | 801~1860 | ||
| Galvannealed (CQ,DQ) | Thickness: 0.6-2.3 Width: 801-1630 |
0.5~0.6 | 1000~1350 |
| 0.6~2.3 | 801~1630 | ||
| Galvannealed (DDQ, EDDQ) | Thickness: 0.61-2.3 Width: 801-1630 |
좌동 | 좌동 |
| High tensile steel(TS 35,40,50Kg) | Thickness: 0.4-2.0 Width: 700-1860 |
0.4~0.6 | 700~1400 |
| 0.7~0.8 | 700~1750 | ||
| 0.8~1.6 | 700~1860 | ||
| 1.6~2.0 | 801~1860 | ||
| GI(EDDQ) | Thickness: 0.5-2.0 Width: 600-1700 |
0.5~0.7 | 600~1600 |
| 0.8~2.0 | 600~1700 | ||
| GI(High Tensile Steel) | Thickness: 0.4-2.0 Width: 600-1850 |
0.4~0.7 | 600~1650 |
| 0.8~2.0 | 600~1850 | ||
| GI(Steel for Structural Uses) | Thickness: 0.3-2.0 Width: 600-1800 |
0.3~0.6 | 700~1350 |
| 0.6~0.8 | 600~1700 | ||
| 0.8~2.0 | 600~1800 | ||
| GI(CQ,DQ,DDQ) | Thickness: 0.6-2.3 ?Width: 600-1850 |
0.6~0.7 | 600~1700 |
| 0.7~1.6 | 600~1850 | ||
| 1.6~2.3 | 800~1750 | ||
